1-3
6-Way Power Seat (If Equipped)
This switch is designed to
imitate the movements of
your seat cushion. It is
located on the left side of
the driver’s or the right side
of the passenger’s
seat cushion.
To move the seat forward or rearward, slide the switch
forward or rearward. To raise or lower the seat, push the
switch up or down. To raise or lower the front portion of
your seat, push the front of the switch up or down. To
raise or lower the rear portion of your seat, push the rear
of the switch up or down.
Heated Front Seat (If Equipped)
If your vehicle is
equipped with this
feature, both the
driver’s and
passenger’s heated seat
switches are located on
the instrument panel
near the comfort
controls. The driver’s
switch is on the left,
and the passenger’s on
the right.
There are two settings, LO and HI. The LO setting is a
lower temperature than the HI setting. To choose the
LO setting, press the top part of the toggle switch once.
A light on the switch will light up to show you the
LO setting has been selected.
To choose the HI setting, press the top part of the toggle
switch twice. A light on the switch will light up to show
you the HI setting has been selected.
To turn the system off, press the lower part of the toggle
switch once. The light should go out when the system is
not in use.
To Next Page
Loading...
Need help?
General
