5-6
6. Check that the jumper cables don’t have loose or
missing insulation. If they do, you could get a shock.
The vehicles could be damaged, too.
Before you connect the cables, here are some basic
things you should know. Positive (+) will go to
positive (+) and negative (-) will go to a heavy,
unpainted metal engine part. Don’t connect positive
(+) to negative (
-), or you’ll get a short that would
damage the battery and maybe other parts, too. Don’t
connect negative (
-) to negative (-) on the dead
battery, either, as this can cause sparks.
CAUTION:
Fans or other moving engine parts can injure you
badly. Keep your hands away from moving parts
once the engine is running.
To Next Page
Loading...
Need help?
General
