5-8
9. Now connect the black negative (-) cable to the good
battery’s negative (
-) terminal.
Don’t let the other end touch anything until the next
step. The other end of the negative cable doesn’t go
to the dead battery.
It goes to a heavy, unpainted, metal part on the
engine of the vehicle with the dead battery.
10. Attach the cable at least 18 inches (45 cm) away
from the dead battery, but not near engine parts that
move. The electrical connection is just as good
there, but the chance of sparks getting back to the
battery is much less.
11. Now start the vehicle with the good battery and run
the engine for a while.
12. Try to start the vehicle with the dead battery.
If it won’t start after a few tries, it probably
needs service.
To Next Page
Loading...
Need help?
General
