yellowblue
6-31
Jump Starting
For jump starting instructions, see “Jump Starting” in
the Index.
Bulb Replacement
For the type of bulb, see “Replacement Bulbs” in
the Index.
Halogen Bulbs
CAUTION:
Halogen bulbs have pressurized gas inside and
can burst if you drop or scratch the bulb. You or
others could be injured. Be sure to read and
follow the instructions on the bulb package.
Headlamps
1. Open the hood.
2. Remove the front turn signal/parking lamp assembly.
See “Front Turn Signal/Parking Lamps” later in
this section.
3. Remove the two wing nuts located on top of the
headlamp assembly.
4. Unscrew the black retainer ring that holds the bulb
assembly in place.
5. Pull the bulb assembly straight up from the
lamp housing.
To Next Page
Loading...
