Oleo-Mac SPARTA 250 User Manual

I
D
GB
SK
OPERATOR'S INSTRUCTION BOOK
MANUALE DI USO E MANUTENZIONE
BEDIENUNGSANLEITUNG
MANUEL D'UTILISATION ET D'ENTRETIEN
MANUAL DE INSTRUCCIONES
NÁVOD NA POUŽITIE A ÚDRŽBU
Pubbl. 61030130A rev. 1 - Set/2013
F
SPARTA 250 (25.4 cm
3
)
E

Oleo-Mac SPARTA 250 Specifications

General

Engine Type	2-stroke
Displacement	25.4 cm³
Power Output	1.0 HP
Weight	6.2 kg
Fuel Tank Capacity	0.75 L
Shaft Type	Straight
Cutting System	Nylon head / Metal blade

Summary

Introduction

Hearing Damage Risk Warning

Alerts users to potential hearing damage from machine noise.

Explanation of Symbols and Safety Warnings

General Safety Precautions

Essential safety rules for operating the brushcutter safely.

Machine Specifications

Identification and Performance Data

Details machine type, serial number, sound levels, and operating speeds.

Brush Cutter Components

Safety Precautions

User Responsibilities and General Safety Rules

Rules for safe operation, user condition, and bystander safety.

Safety Precautions

Protective Clothing

Details required safety apparel like boots, gloves, and eye/ear protection.

Assembly Instructions

Fitting the Safety Guard

Instructions for installing the safety guard on the shaft arm.

Fitting the Disk

Steps for mounting and securing the cutting disk.

Assembly Instructions

Fitting the Nylon Line Head

Steps for attaching the nylon line head to the machine.

Fitting the Handle

Instructions for mounting and adjusting the handle assembly.

Assembling the Safety Boom

Guidance on installing the safety boom for specific cutting operations.

Preparing to Work

Harness Adjustment

Instructions for adjusting the harness for proper balance and height.

Fuel Handling and Safety

Starting the Engine

Fueling Precautions

Safety rules for refueling, including fuel type and storage.

Starting Procedures

Steps for starting the engine, including choke and throttle settings.

Fueling the Engine

Recommended Fuel and Mixing Ratios

Details on the correct fuel type, octane rating, and oil mixing ratios.

Fueling the Engine

Fuel Types and Warnings

Information on unleaded gasoline, alkylate gasoline, and fuel warnings.

Starting the Engine

Engine Starting Procedures

Step-by-step guide for starting the engine, including choke and throttle usage.

Engine Break-in

Guidelines for the initial running-in period of the engine for optimal performance.

Starting the Engine

Starting Difficulties

Troubleshooting steps for engines that are flooded or difficult to start.

Starting the Engine

Starting a Flooded Engine

Procedures for clearing excess fuel from a flooded engine.

Starting the Engine

Troubleshooting Starting Issues

Steps for dealing with engines that won't start or run properly.

Engine Break-in

Starting the Engine

Starting Engine and Cold Start Procedure

Detailed steps for starting the engine, including choke lever positions.

Stopping the Engine

Usage Guidelines

Prohibited Uses

Details operations that should not be performed with the brushcutter.

Usage Guidelines

Prohibited Operations and Risks

Warnings against kickback, improper cutting, and using unauthorized parts.

Usage Guidelines

Safe Cutting and Precautions

Advice on safe cutting practices, avoiding kickback, and working near obstacles.

Usage Guidelines

Safe Working Area and Conditions

Guidelines for safe operation concerning terrain, visibility, and operator posture.

Usage Guidelines

General Operating Procedures

General advice on safe operation, including working conditions and environment.

Usage Guidelines

Specific Cutting Tool Precautions

Specific precautions when using rigid blades, especially in stony areas.

Usage Guidelines

Machine Checks and Operation

Advice on operating the machine safely, including blade checks and maintenance.

Usage Guidelines

Safe Operating Posture and Engine Operation

Precautions for safe operation, including terrain, visibility, and operator posture.

Cutting Techniques

Forestry Clearing

Techniques for clearing brush and vegetation in wooded areas.

Grass Clearing with Grass Blade

Instructions for cutting grass and weeds using a grass blade.

Cutting Techniques

Clearing Vegetation

Methods for removing unwanted vegetation with the trimmer head.

Grass Cutting with Trimmer Head

Steps for cutting grass and weeds using the trimmer head.

Cutting Techniques

Trimming Techniques

How to trim grass and edges, and reduce line wear.

Clearing Techniques

Methods for clearing unwanted vegetation with the trimmer head.

Cutting Techniques

Cord Wear and Cutting Techniques

How to minimize cord wear and use cutting techniques effectively.

Cutting and Sweeping Techniques

Using the trimmer for cutting grass and clearing debris.

Cutting Techniques

Grass Cutting and Clearing Precautions

Safety advice for cutting in poor visibility or extreme temperatures.

Maintenance

Blade Sharpening

Instructions on how to sharpen the cutting blades correctly.

Maintenance

Sharpening the Blades

Detailed steps for sharpening the cutting blades correctly.

Sharpening the Disk

Instructions for sharpening the cutting disk correctly.

Maintenance

Nylon Line Head Maintenance

Instructions for using and maintaining the nylon line head.

Replacing the Nylon Line

Steps for replacing the nylon line in the cutting head.

Maintenance

2-Thread Nylon Head

Information about the 2-thread nylon head and its usage.

Replacing Nylon Line (250 TR)

Detailed steps for replacing the nylon line on the 250 TR model.

Replacing Nylon Line (250 S - 250 T)

Detailed steps for replacing the nylon line on the 250 S - 250 T models.

Maintenance

Air Filter Maintenance

Instructions for cleaning or replacing the air filter.

Fuel Filter Maintenance

Guidance on checking and cleaning the fuel filter.

Engine Cleaning

How to clean engine cooling fins for proper operation.

Spark Plug Maintenance

Instructions for cleaning and checking the spark plug.

Gear Housing Maintenance

How to check and lubricate the gear housing.

Transmission Maintenance

Lubrication intervals for the drive shaft joints.

Muffler Maintenance

Muffler Maintenance

Muffler Safety and Maintenance

Warnings about hot mufflers, damage, and proper maintenance.

Transportation and Carburetor Maintenance

Machine Transportation

How to safely transport the brushcutter, including using protective covers.

Transportation and Carburetor Maintenance

Carburetor Adjustment and Transport Precautions

Carburetor adjustment advice and safety for transporting the machine.

Exceptional Maintenance

Exceptional Maintenance

Professional Inspections and Parts

Advice on using authorized service and original spare parts for maintenance.

Storage Instructions

Storage Instructions

Long-Term Storage Procedures

Steps for draining fuel, cleaning, and storing the machine properly.

Technical Specifications

Recommended Cutting Attachments

Safety Warnings for Cutting Attachments

Crucial safety warnings regarding the use of cutting attachments.

Technical Specifications

Acoustic and Vibration Data

Measured and guaranteed sound power levels and vibration levels.

Declaration of Conformity

Declaration of Conformity

Technical Documentation Reference

Details on where technical documentation is deposited and contact information.

Maintenance Schedule

Maintenance Schedule

Maintenance Intervals and Tasks

Detailed breakdown of maintenance tasks based on frequency and conditions.

Maintenance Schedule

Maintenance Schedule Summary

A comprehensive summary of maintenance tasks and their frequencies.

Troubleshooting

Engine Starting Problems

Solutions for issues related to engine starting, acceleration, and idling.

Troubleshooting

Engine Performance Issues

Troubleshooting steps for common engine performance problems like no acceleration or stalling.

Troubleshooting

Engine and Cutting Attachment Issues

Solutions for problems where the engine runs but the cutting attachment does not rotate.

Warranty Certificate

Warranty Certificate

General Warranty Conditions

Explains warranty terms, exclusions, and requirements.