Why Oleo-Mac Trimmer engine will not start?
If your Oleo-Mac Trimmer's engine won't start or stops shortly after starting, it could be due to a lack of spark or a flooded engine. First, check for a spark at the spark plug tip, and if there's no spark, try again with a new spark plug (BPMR7A). If that doesn't work, follow the procedure on page 26. If the engine still won't start, repeat the procedure using a new spark plug.
Perché il motore del Trimmer Oleo-Mac non si avvia?
If your Oleo-Mac Trimmer's engine won't start or stops shortly after starting, it could be due to a lack of spark or a flooded engine. First, check for a spark at the spark plug tip, and if there's no spark, try again with a new spark plug (BPMR7A). If that doesn't work, follow the procedure on page 26. If the engine still won't start, repeat the procedure using a new spark plug.
Why Oleo-Mac Trimmer engine does not reach full speed?
If your Oleo-Mac Trimmer engine doesn't reach full speed or emits excessive smoke, check the oil fuel mixture by using fresh fuel and the correct 2-cycle oil mix. Also, the air filter might be dirty. Clean it per the instructions in the Maintenance-Air Filter Section.
Perché il motore del Trimmer Oleo-Mac non raggiunge la massima velocità?
If your Oleo-Mac Trimmer engine doesn't reach full speed or emits excessive smoke, check the oil fuel mixture by using fresh fuel and the correct 2-cycle oil mix. Also, the air filter might be dirty, so clean it per the instructions in the Maintenance-Air Filter Section.
How to fix Oleo-Mac Trimmer that starts but will not idle?
If your Oleo-Mac Trimmer starts, runs, and accelerates but won't idle, adjust the idle speed screw “T” clockwise to increase the idle speed. See Operation-Carburetor Adjustment.
Come riparare il Trimmer Oleo-Mac che si avvia ma non tiene il minimo?
To fix your Oleo-Mac Trimmer that starts, runs, and accelerates but won't idle, adjust the idle speed screw “T” clockwise to increase the idle speed; see chapter Manutenzione carburatore.
Attaching the protective guard to the shaft arm for safe operation.
Installing the cutting blade onto the shaft arm, ensuring correct rotation direction.
Installing the nylon line head onto the shaft arm.
Mounting and securing the handle onto the shaft arm for operator comfort.
Attaching the safety boom when using a disc instead of a nylon line head.
Adjusting the harness for proper balance and height of the brush cutter.
Safe procedures for handling fuel, including precautions against fire and burns.
Procedure for clearing a flooded engine to restart it.
Step-by-step guide for starting the engine, including choke and throttle settings.
Proper procedure for the initial engine run-in period to ensure longevity.
Safety measures for the work environment to prevent accidents and injuries.
Guidance on effective and safe methods for operating the brush cutter.
Fundamental safety guidelines for operating the brush cutter.
Using the nylon line head for cutting grass and trimming.
Specific techniques for close-quarters trimming and edge work.
Using the rotating cord's fan effect for quick removal of debris.
Techniques for clearing brush and small trees using a saw blade.
Using a grass blade for cutting tall or coarse grass.
Methods for clearing trees and brush with a saw blade.
Techniques for cutting grass using the nylon line trimmer head.
Using the trimmer head for cutting grass in hard-to-reach areas.
Removing unwanted vegetation using the trimmer head.
Trimming grass efficiently with the trimmer head.
Using the rotating cord's fan effect for quick removal of debris.
Techniques for mowing grass in various conditions.
Methods for clearing trees and brush with a saw blade.
Guidelines for safely using the circular saw blade for thinning brush.
Techniques for cutting stems and brush with a saw blade.
Instructions for sharpening cutting blades and saw blades correctly.
Step-by-step guide for replacing the nylon line in the trimmer head.
Cleaning and inspecting the air filter for optimal engine performance.
Checking and cleaning or replacing the fuel filter.
Cleaning engine cylinder fins for proper cooling and performance.
Cleaning and checking the spark plug and electrode gap.
Checking and maintaining the grease level in the gear housing.
Lubricating the rigid tube joint with grease.
Instructions for cleaning and replacing the air filter.
Procedures for checking and cleaning the fuel filter.
Cleaning engine components like cylinder fins.
Spark plug cleaning and gap adjustment.
Maintaining the gearbox by checking grease levels.
Lubricating the drive shaft connection.
Instructions for maintaining the muffler, including catalytic converter safety.
Adjusting carburetor settings for optimal engine performance.
Guidelines for safely transporting the brush cutter.
Recommendations for periodic inspections by authorized technicians.
List of recommended cutting attachments and their part numbers.
Terms and conditions under which the product warranty is valid.
To Next Page
General
