Need help?Do you have a question about the OLIMEX ESP32-POE-ISO-EA and is the answer not in the manual?
Diagram detailing the physical layout and component placement of the ESP32-POE board.
Overview of the General Purpose Input/Output (GPIO) pins available on the ESP32-POE.
Diagram detailing the physical layout and component placement of the ESP32-POE-ISO board.
Overview of the General Purpose Input/Output (GPIO) pins available on the ESP32-POE-ISO.
Links to the schematic diagrams for ESP32-POE and ESP32-POE-ISO board revisions.
Details on the power sources and consumption for the ESP32-POE and ESP32-POE-ISO boards.
Explanation of the Universal EXTension (UEXT) connector, its signals, and compatible modules.
General| Microcontroller | ESP32 |
|---|---|
| RAM | 520 KB |
| Flash Memory | 4 MB |
| PSRAM | 8 MB |
| Wi-Fi | 802.11 b/g/n |
| Operating Voltage | 3.3V |
| Ethernet | 10/100 Mbps |
| Clock Speed | 240 MHz |
| Operating Temperature | -40°C to +85°C |
| CPU | Dual-core 32-bit LX6 |
| Power over Ethernet | Yes |
| Isolation | Yes |
| Bluetooth | Bluetooth v4.2 |
| USB | USB Type-C |
| Programming | Arduino, ESP-IDF |
| Input Voltage | PoE or 5V |
| Analog Input Pins | 12 |
To Next Page
