Olimpia splendid Caldo Relax - Preliminary Instructions

17
Caldo Relax
EN
PRELIMINARY INSTRUCTIONS
- Take the appliance out of the cardboard box and unwind the cable to
its full length.
- Place the appliance on a rm, at surface, in a stable upright position.
- Make sure switch "1" is turned to "0".
Selecting functions
- To activate the FAN function, turn knob "1" to position " ".
- To activate the MINIMUM POWER function, turn knob "1" to
position “ • “.
- To activate the MAXIMUM POWER function, turn knob "1" to
position “ •• “.
Setting the thermostat
- To set the room temperature to a given value
(thermostatting function), turn knob "2" clockwise until it stops.
Once the required temperature has been reached in the room, turn
knob “2” slowly counter-clockwise until the appliance switches off. The
appliance will then switch itself on again automatically when the room
temperature drops below the limit set.