Olimpia splendid PELER 4D - Installation Guide; Handling and Assembly Instructions; Installation Safety Warnings

ENGLISH
EN - 11
2 - INSTALLATION
2.1 - HANDLING THE APPLIANCE
• Transport and handling of the appliance must be carried out in ver-
tical position.
• Tip the appliance over and assemble the four castors (8) in their seats,
pushing them until fully inserted (Fig.B1).
CAUTION
Moving the cooler on delicate ooring (e.g. wooden ooring):
• Empty the water compartments.
• Take great care when moving the cooler as the wheels could mark
the ooring. Although the wheels are made from a rigid material
and are swivelling, they could get damaged by use or excessive
dirt.
It is recommended to check that the wheels are clean and that
they can move freely.
2.2 - WARNINGS
A failure to respect what follows may cause damages to the
appliance.
a. Install the appliance on a at, stable
surfaceandontheoor.
b. The appliance must only be connected
to earthed power outlets.
c. Makesurethatcurtainsorotherobjects
donotobstructtheairsuctionlters.
d. Makesuretokeepaminimumdistance
of15cm(Fig.B)betweenthecoolerand
theadjacentgures.