Olimpia splendid PELER TOWER - 3.3.a - Preliminary operations; 3.3.b - Filling (fig. G)

PELER TOWER
ENGLISH
EN - 16
3.3.a - Preliminary operations
• Place the appliance on a stable and not inclined base, at least 15
cm. from the wall or from any other object, in order to ensure the
correct air circulation. Place it on a water-resistant surface since the
possible water leakage could damage furniture or the oor.
• Do not place the appliance directly on carpets, towels, blankets or
other absorbent surfaces.
• Insert the plug in the power socket; the appliance beeps and the
display shows room temperature in °C.
Before electrically connecting the appliance, make sure the plate data
correspond to those of the electricity distribution network.
3.3.b - Filling (g. G)
Itisnecessarytoaddwaterinthetankbeforethecooling/humidierfunction
is activated.
Watercanbeaddedbyopeningthereservoirdoor(6).
Make sure that the cap (g. A - pos.15) is positioned correctly.
- Pour water into the compartment.
- Checkthewaterlevelinthetankthroughthewaterlevelgauge(7)
(g.L).
- Closethedoor(6)again.
• Do not ll the tank beyond the maximum indicated level.
• Always use clean water.
• The appliance could produce a slight smell or the water in the tank
could be slightly coloured during rst use; this events are normal and
absolutely harmless for the user’s health.