Olimpia splendid PELER TOWER - 3.4 - APPLIANCE OPERATING INSTRUCTIONS

ENGLISH
EN - 17
3.4 - INSTRUCTIONS FOR OPERATION
a. Insert the plug in the power socket.
When the appliance is switched on for the rst time, you will hear a beep and it will
go into stand-by. All buttons will be disabled, with the exception of the ON/OFF one.
The functions can be enabled or modied either from the control panel or from the
remote control.
b. Press th ON/OFFkey(A1)toswitchtheapplianceon(abeepisheard).
c. ON/OFFkey(A1)againtoswitchtheapplianceoff(abeeeepisheard).
 Abeepisheardeverytimeakeyispressed.
d. Manuallyliftthehorizontalapsasdesired.
3.4.a - ON/OFF key (A1)
When the appliance is in stand-by, all buttons are disabled, with the exception
of the ON/OFF button.
Press the ON/OFF button to turn the appliance on. The display will show room
temperature in °C.
Thedefaultinitialfanspeedis“low”andthedefaultoperatingmodeis“normal”;
therelativeLEDs(B2andB6)willlightup.Allfunctionsareavailable.
3.4.b - Air speed key (A3)
Airspeedcanbechangedaccordingtothissequence:
Low ---
> Medium
---
> High
---
> Low
---
> ...
- Accordingtothesetspeed,thedisplaywillshowtherelativeLED.
LEDB6(Low)
LEDB7(Medium)
LEDB8(High)