Olimpia splendid PHENIX E - 5.2 - Other Error Types

PHENIX E INVERTER
ENGLISH
EN - 41
LC 05 Frequency limit caused by voltage
LC 03 Frequency limit caused by current
LC 02 Frequency limit caused by TP
LC 01 Frequency limit caused by T3
LH 00 Frequency limit caused by T2
LC 06 Frequency limit caused by PFC
LH 07 Frequency limit caused by remote controller
NA no malfunction or pretecion
FOR EACH ERROR:
Switcho󰀨theunitandwait2minutesbeforerestartingit,iftheproblempersists,pleasecontactthe
assistance centre.
5.2 - OTHER ERROR
Thedisplayboardmayshowagarbledcodeoracodeundenedbytheservicemanual.Ensurethatthis
code is not a temperature reading.
Test the unit using the remote control.
- If the unit does not respond to the remote, the indoor PCB requires replacement.
- If the unit responds, the display board requires replacement.