Olimpia splendid SHERPA AQUADUE OS-CEINH48EI User Manual

Manual divided into 3 chapters: General Information, Installation, Use and Maintenance.

Manufacturer not responsible for damages due to failure to follow instructions.

Unit complies with relevant European Directives for safety and EMC.

Symbols referring to service or technical support situations.

Pictograms indicating dangers like high voltage, generic danger, and heat.

Fundamental safety rules for using electricity and water appliances.

Procedures for checking the product upon delivery and unpacking.

Details on the internal unit models and their specifications.

Identifies main components of the internal unit with labels.

Lists parts supplied with the internal unit packaging.

Instructions for installing the indoor unit, including preparation and levelling.

Step-by-step guide to remove the front panel of the indoor unit.

How to access internal components and the electric panel.

Guidelines for installing the outdoor unit, including location and base requirements.

Details on refrigerant pipe connections between indoor and outdoor units.

Procedure for adding refrigerant if pipe length exceeds 5m.

Instructions for connecting water pipes to the unit, including filters and valves.

How to set circulation pump modes (Ap-v, Ap-c) using the control knob.

Specifies water quality parameters required for the system.

Procedure for filling and bleeding the hydraulic system.

Guidelines for making electrical connections to internal and external units.

Checks to perform before initial start-up.

Overview of the touch-screen control panel and its interface.

Explanation of different operating modes like Standby, Cooling, Heating, ECO, Night.

How to adjust set points for cooling, heating, and DHW temperatures.

Displays current system temperatures: water, outdoor air, DHW tank.

Access to other functions via the Menu page.

Displays system hydraulic and refrigerant diagrams.

Function to adjust water temperature based on outside air for energy saving.

Table of alarms and overrides for the internal unit display.

Displays software and hardware versions of the unit.

Shows operating hours for components like compressor and pumps.

Setting and displaying the system's date and time.

Window for displaying and setting system parameters.

Settings for screen language, screen saver delay, and brightness.

Access to sub-windows for specific functions like Anti-legionella and Pumps.

Activate/deactivate circulation pumps and three-way valve.

Access to external unit PID control window (for service use).

Displays component status, temperatures, and input/output values.

How to control appliance functions remotely using free contacts.

Procedure for purging air by forcing circulation pump operation.

How the unit produces domestic hot water, including temperature limits.

Procedure for deactivating and shutting down the heat pump.