Olimpia splendid Unico EDGE - 3.5 - Air Conditioner Functions; 3.5.1-3.5.5 - Basic Functions & Modes

UNICO EDGE R32
EN - 25
ENGLISH
3.5 - DESCRIPTION OF THE AIR CONDITIONER FUNCTIONS
3.5.1 - Main switch-on and running management
• Oncetheseoperationshavebeencarriedout,themachinemayberegulatedusingtheremotecontrol.
 Inordertotransmitcommandstotheindoorappliance,pointthefrontoftheremotecontroltowardthe
appliance’scontrolpanel.
 Thedeviceemitsabeepwhenitreceivesacommand.
• Themaximumdistancefromwhichtheappliancecanbecontrolledisabout8meters(withchargedbat-
teries).
3.5.2 - ECO key
• PressingtheB2keyontheremotecontrolactivatestheenergysavingfunction,automaticallyoptimizing
themachinefunctions,theD11 symbolappearsonthedisplay.
3.5.3 - Turning the unit ON/OFF
• PresskeyB1ontheremotecontroltoactivateordeactivate(stand-by)theairconditioner.
 Thecontrolsystemoftheunitisequippedwithmemory,forthisreasonallthesettingswon’tbelostwhen
shuttingofftheapplianceitself.
In case of prolonged stop of the machine, it must be deactivated turning the main
switch off or unplugging the machine from the mains.
3.5.4 - Operation in “Cooling” mode only
• Whenusedinthismode,theairconditionerdehumidiesandcoolstheroom.
• Toactivatethismode,pressthekeyB4ontheremotecontrolseveraltimesuntiltheD3 symbol appears
onthedisplay.
• Inthisrunmode,therequiredtemperatureandfanspeedcanbeset.
 Afterthreeminutes(asamaximum)fromactivationinthisoperatingmodethecompressorwillstartand
theappliancestartsemittingcoldair.
• ThestartofthecompressorisindicatedbythelightingupoftheLED B(green)locatedontheconsole
(g.40).
3.5.5 - Operationin“Dehumidication”modeonly
• Whenusedinthismode,theairconditionereliminatesthehumidityintheroom.
 Thisfunctioncanbeextremelyusefulbetweenseasons,particularlyonrainydayswhenthetemperature
isnotuncomfortablebuttheexcesshumidityfeelsunpleasant.
• Inthismode,bothroomtemperatureandfanspeedsettingsareignored,whichcorrespondtominimum.
• Anyindicationoffantemperatureandspeeddisappearsfromtheremotecontroldisplay.
• Toactivatethismode,presstheB4keyontheremotecontrolseveraltimesuntiltheD4 symbolandthe
D1 automaticventilationsymbolappearonthedisplay.
• Inthisoperatingmodeitisnormalfortheairconditionertofunctionintermittently.