Olimpia splendid Unico Twin - Gas Handling, Proper Use, and Hazardous Zones; Fluorinated Gas Safety Information; Guidelines for Proper Appliance Use; Installation in Hazardous Environments

ENGLISH
EN - 8
0.4 - NOTES REGARDING FLUORINATED GASES
• Thisclimatecontrolappliancecontainsuorinatedgas.
  Forspecicinformationregardingthetypeandquantityofgas,refertothe
dataplateafxedtotheunit.
 • Theinstallation,assistance,maintenanceandrepairoftheappliance,must
beperformedbyaqualiedcertiedtechnician.
 • Productremovalandre-cyclingoperationsmustbeperformedbyaqualied
certiedtechnician.
 • Ifthesystemhasaleak-detectiondeviceinstalled,thechecksforleaksmust
be performed at least every 12 months.
 • When the unit is checked for leaks,keeping a record of all inspections is
highly recommended.
0.5 - PROPER USE
 • Theair-conditionershouldbeusedfortheexclusivepurposeofproducing
hot or cool air (on demand) for the sole purpose of obtaining a comfortable
temperature in the room.
 • Animproperuseofthedevices(externalandinternal)withpossibledamages
caused to people, things or animals relieves OLIMPIA SPLENDID from any
liability.
0.6 - HAZARDOUS ZONES
 • The climate controllers must not be installed in environments with the presence
ofinammablegases,explosivegases,inveryhumidenvironments(laundries,
greenhouses, etc.), or in places with other machines that generate a strong
heat source, in proximity of a sources of salt water or sulphurous water.
• DONOTusegas,gasolineorotherinammableliquidsneartotheclimate
controller.
 • Theclimatecontrollerdoesnothaveafanfortheintroductionoffreshoutdoor
air into the room; ventilate by opening doors and windows.
• Alwaysinstallcircuitbreakerandadedicatedpowercircuit.
 Thisproductmustbeusedexclusivelyaccordingtothespecications
indicatedinthismanual.Usedifferenttothatspecied,couldcauseserious
injuries.
THE MANUFACTURER IS NOT LIABLE FOR INJURY/DAMAGE TO
PERSONS/OBJECTS DERIVING FROM FAILURE TO COMPLY WITH THE
REGULATIONS CONTAINED IN THIS MANUAL.