Olimpia splendid VERTIGO - 4 - MAINTENANCE AND CLEANING; Cleaning Procedures and Filter Replacement

VERTIGO
EN - 15
ENGLISH
4 - MAINTENANCE AND CLEANING
Before proceeding with any maintenance and cleaning
operation, always make sure that you disconnected
the power plug from the socket and check that the
appliance is not hot.
Do not wash nor soak the appliance in water. Prevent
water from entering in contact with the internal com-
ponents of the appliance. Risk of electric shocks!
4.1 - CLEANING
4.1.a - Cleaning the appliance and the remote control
a. Use a dry cloth to clean the appliance and the remote control.
b.Itispossibletouseaclothmoistenedwithcoldwatertocleantheapplianceincaseit’sverydirty.
Do not use a chemically treated or antistatic cloth to clean the appliance.
Do not use gasoline, solvent, polish or similar solvents.
These products could cause the breakage or deformation of the plastic sur-
face.
Make sure the appliance is completely dry before reconnecting the plug to the
power socket.
4.1.b - Air inlets and outlets cleaning
Useasoft-bristledbrushoravacuumcleanertocleantheairinletsandoutlets(Fig.G).
Do not allow dust too accumulate in order to avoid malfunctions.
4.1.c - Filter replacement (Fig.H)
Afterapproximately700hofoperationoftheappliance,thelterMUSTbereplaced.
Donotusetheappliancewithoutlterorifthelatterisdamaged.
Do not use the appliance beyond the 700 h of operation without changing
thelter.