HVBTR1200‐004A
5|Page
Use the direction keys to highlight the program you wish to record:
Press the green TXT key to open the record screen
Set Timer Service to Record
TIP: EPG is not always up to date and does not always take into account program overruns and so on. At
this point you could set the Wakeup Time to an earlier time and the Duration to a longer period to allow for
difference between the EPG and actual running times. See 3. Record Timer section following for an example.
Note: If your recording exceeds 3 hours, set Auto Standby to Off.
See 7. Auto Standby at the end of this document.
Use the direction keys to highlight Save and press the OK key
To Next Page
Loading...