14
CONNECTIONS
Audio and Video Connections
Refer to the User's manual1.
Before connecting the power source, 2. ensure that all the connections are properly done.
USB Connection
Insert the USB into the USB port on the left panel of the main unit. 1. With no disc loaded or in stop mode,
press and hold the LCD MODE/USB button to enter source mode. Press the Up/Down direction button to
select USB and then press ENTER to access.
It takes a short while for the unit’s reading data. After the device is detected,
the screen will display the 2.
working menu, press the direction buttons to select the desired file from the menu and press Play/Pause to
start playback.
Be sure that your unit is at low volume level before con-
necting the headphones. Increase the volume gradually
for your comfortable listening.
CAUTI ON:
Hearing experts advise against the constant use of per-
sonal stereos played at high volume. Constant high vol-
ume use can lead to hearing loss. If you experience ring-
ing in the ears or hearing loss, discontinue use and seek
medical advise.
Headphone Connection
To Headphone Jack
To Next Page
Loading...
Need help?
General
