Why my Oliso Iron does not heat?
If your Oliso Iron isn't heating up, there are a few things you can check: * First, make sure the fabric selector knob is set to a fabric setting. * Next, ensure the iron is fully plugged into the socket. * Finally, touch the handle to activate the heating process.
What to do if my Oliso Iron does not steam?
If your Oliso Iron isn't steaming, make sure the fabric selector is set to wool, cotton, or linen for continuous steam. Also, check that the steam selector is turned to a setting other than off. Try moving the steam selector from the off position to the maximum setting several times to clear any potential blockages.
Why does my Oliso Smart TG1250 leak?
If your Oliso Iron is leaking, remember to store it vertically with the iTouch™ switch OFF. Alternatively, turn the iTouch™ Technology ON for storage. Ensure the fabric selector knob is set to the cotton or linen range for proper steam. When using the steam burst function, allow 3 seconds between each use.
How to fix Oliso Smart TG1250 Scorch guards that do not come out?
If the Scorch guards on your Oliso Iron aren't deploying, ensure the switch on the back of the iron is set to the ON position and that the iron is fully plugged into the socket. The iTouch™ Technology will raise the sole-plate when you move your hand away from the iron.
General| Brand | Oliso |
|---|---|
| Model | TG1250 |
| Type | Smart Iron |
| Power | 1800 Watts |
| Auto Shut-Off | Yes |
| iTouch Technology | Yes |
| Cord Length | 8 feet |
| Voltage | 120 Volts |
| Weight | 3.5 pounds |
| Soleplate Material | Stainless Steel |
To Next Page
