Olive Bello - Preparation for Use; Pre-Use Checks and Safety Precautions

REV 0 [12.10] Bello User Manual | 11 00000XXX
Introduction of product
and components
Preparation for use
How to use
How to maintain, repair
& store the product
Solution of product
problems
Overview of warranty
2. Preparation for use
- 2.1 Items to checked before use
2.1.1 Please check the following items upon the initial use of the product.
• Before use, please be sufficiently familiarized with the user manual.
• Careful reading of the user manual provided and checking of the use part before use are
recommended.
• Please download the Bello app from the smart phone and activate the instrument and Bluetooth
before use.
• Higher than iOS 10.3 version or Higher than Android 6.0(Marshmallow) version
• When the product is used for the first time, please use it after complete charging.
• When the cable is damaged, do not connect it with the body, because it will cause breakdown of
the product.
• In the case of the adaptor, please use the following specifications.
Product having acquired the certification of IEC/EN 60950-1 - Input: 100-240V, 50/60Hz
- Rated Input: 5 Vdc, 0.5A or more
• If possible, please avoid the places where the product is directly exposed to the sun light.
• Upon charge, please make sure that the cable is correctly connected. Be careful about the
electrocution risks that will occur if the product is connected using wet hands.
Caution
Be careful to minimize impacts on the product upon use .