Olive Bello - Page 15

REV 0 [12.10] Bello User Manual | 15 00000XXX
Introduction of product
and components
Preparation for use
How to use
How to maintain, repair
& store the product
Solution of product
problems
Overview of warranty
⚫ Battery balance LED
State
Role
Battery state
LED
During connection of the
charging cable
1. In full charging state
=> Always lighted
2. During charging
=> On for 2sec / Off for 2sec
When there is no charging cable
1. Low-voltage warning (Below 3.5V)
=> Blinking at the interval of 0.5sec
2. Forced power saving (Below 3.3V)
=> Blinking at the interval of 0.25sec
⚫ LED error message
Name
Role
X
1. When Fail occurred in Bello Device during measurement
2. When no appropriate measurement results are received from
the server after completion of measurement