Supporto Tecnico / Technical Support
Bollettino Informazione Tecnica / Technical Information Bulletin
1 / 6
Modulo IO-TIB-A (Liv.06)
INFORMAZIONI RISERVATE, DA DIVULGARE SOLO SU AUTORIZZAZIONE DEL “SUPPORTO TECNICO”
CONFIDENTIAL INFORMATION ONLY TO BE DISCLOSED WITH PERMISSION FROM “TECHNICAL SUPPORT”
compilato da / compiled by approvato da / approved by data / date codice / code
TIB
C. Gillio R. Nicoletta 22/05/14 808457 02
prodotto / product
d-Copia 3500MF Plus, d-Copia 4500MF Plus, d-Copia 5500MF Plus
Sistemi interessati / system concerned
d-Copia 3500MF, d-Copia 4500MF, d-Copia 5500MF,
d-Copia 6500MF, d-Copia 8000MF, PF-730, PF-730(B)
titolo / subject
MEASURES AGAINST THE PAPER CONVEYING SENSOR NON-ARRIVAL JAM (PREVENTION OF
FRICTIONAL WEAR OF THE PAPER CONVEYING ACTUATOR)
Descrizione/Description
TOPIC:
If the paper detection margin decreases due to the aged frictional wear of the paper detection
parts of the paper conveying actuator (No.2), the paper conveying actuator might not detect
wavy paper (moisture paper).
As a result, the paper conveying sensor could not be turned ON, which might cause paper
conveying sensor non-arrival jam (*).
(*) Paper conveying sensor non-arrival jam: 1502, 1503, 1504, 1904
Content of Changes
(Please refer to the figure in the next page for more details on the changed shape.)
The shape of the paper detection part of the paper conveying actuator (No.2) was changed in
order to prevent its frictional wear and to improve the margins for the paper detection.
To Next Page
Need help?
General