OLT 8x8 Cedar - Roof Framing: Ridge Boards and Supports; Attaching Exterior Rafter Supports; Connecting Roof Ridge Boards

Toll Free 1-888-658-1658 www.outdoorlivingtoday.com sales@outdoorlivingtoday.com
Page 20
38. Complete Front Outside Roof Rafters and Triangular Polygal Window as per Steps 32 -37.
39. Attach Part OO - Exterior Rafter / Doorway Supports - 1 1/2” x 1 1/2” x 27 1/2” underneath and
flush with Outside Rafters. Use 3 - 3” screws per piece to secure. Complete front and rear pieces.
Flush
40. Locate Part P - Roof Ridge Boards - 2” x 5 1/2” x 59 1/4”. There are 2 pieces that need to be
fastened together. Aligning dado cuts and attach with 6 - 2” screws per side.
dado cuts aligned