EasyManua.ls Logo

OLT 8x8 Cedar - Door Assembly: Top Door and Hardware; Attaching Top Dutch Door; Installing Door Handle and Barrel Bolts

Default Icon
34 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com sales@outdoorlivingtoday.com
Page 30
64. Locate Part BB - Top Dutch Door - 32 1/2” x 47”, 2 - Black Butt Hinges and
12 - 2” Black Screws. On ground, attach Hinges to Door first using 2” Black Screws. Align/shim 1/4”
from Bottom Door and attach to Door Trim with 2” Black Screws. Confirm Door swings correctly before
attaching all screws.
1/4” Gap
65. Attach Door Handle and Exterior Black Barrel Bolt
to door. Handle is positioned on top door; Barrel Bolt on
bottom door. Attach Black Barrel Bolt as illustrated to the left
with 3/4” Black Screws.
Note;
Female part of Barrel Bolt is positioned higher than male.
Do a dry run first to position Barrel Bolt correctly before
attaching.
66. Attach Interior Silver Barrel
Bolt to inside of door as illustrated
to the left. Use 3/4” silver screws
to secure. Bolt is used to connect
Top and Bottom Doors.

Related product manuals