EasyManua.ls Logo

OLT GH88 - Doorway Framing and Stability Check

Default Icon
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Outdoor Living Today www.outdoorlivingtoday.com sales@outdoorlivingtoday.com
Page 16
8. Position remaining two Center Posts alongside Corner Walls to create the Doorway. Fasten
Corner Walls to Center Posts with 3 - 2 1/2” Brown Screws each.
Pieces:
- 2x Center Posts
(28 1/2” x 35”)
Hardware:
- 6 x 2 1/2” Brown Screws
9. Take a moment and check if the structure is square. Measure from Corner Post to Corner Post
on the diagonal. Both measurements should be within 1/4” of each other. If measurements don’t
match, adjust walls until square. Diagonal measurement should be approximately 130 1/4”. While
continuing to build, periodically check that your walls are staying square.
130 1/4”

Related product manuals