OLT GH88 - Roof Frame and Panel Installation; Poly Panel Insertion; Door Header and King Stud Installation

Outdoor Living Today www.outdoorlivingtoday.com sales@outdoorlivingtoday.com
Page 17
11. Position Door Header on both the Front and Rear Center Posts. Using 1 - 7 1/4” Structural
Screw per end, fasten Door Header to Center Posts. Ensure Rear Center Poly Panel is installed
before fastening Door Headers.
Pieces:
- 2x Door Header
(3 1/2” x 3 1/2” x 38 1/2”)
Hardware:
- 4x 7 1/4” Structural Screws
10. Locate Rear Center Poly Panel and slide in between rear Center Posts.
Pieces:
- 1x Rear Center Poly
(1/4” x 32” x 52 3/4”)