Outdoor Living Today www.outdoorlivingtoday.com sales@outdoorlivingtoday.com
Page 18
12. Locate King Studs. Center King Stud on Door Header, making sure the dado in the lumber is
lined up. These need to be lined up so the windows can easily be dropped in. When positioned
correctly, fasten King Stud to Door Header with 2 - 2 1/2” Brown Screws each at a slight angle.
Pieces:
- 2x King Stud
(3 1/2” x 3 1/2” x 4 5/8”)
Hardware:
- 4x 2 1/2” Brown Screws
13. Lay out Ridge Board pieces on a flat and level surface. If you have a clamp available, use to
hold the Ridge Boards tight together. Fasten both halves of Ridge Board together with 9 - 1 1/4”
Brown Screws per side.
Pieces:
- 2x Ridge Board A
(1” x 4 1/2” x 47 3/4”)
- 2x Ridge Board B
(1” x 4 1/2” x 29 3/4”)
- 1x Ridge Board C
(1” x 4 1/2” x 36”)
Hardware:
- 18x 1 1/4” Brown Screws
A
C
B
To Next Page
Loading...