Need help?Do you have a question about the Olympia A 230 Plus and is the answer not in the manual?
General| Type | Cold/hot laminator |
|---|---|
| Cutter | Yes |
| Warm-up time | 2.5 min |
| Product color | Black |
| Cutting system | Manual |
| Preheating time | - min |
| Built-in display | No |
| Lamination speed | 400 mm/min |
| Maximum pouch thickness | 125 µm |
| Minimum pouch thickness | 80 µm |
| Maximum lamination width | 330 mm |
| Maximum document thickness | 0.5 mm |
| Current | 1.9 A |
| AC input voltage | 220-240 V |
| AC input frequency | 50 Hz |
| Power consumption (typical) | 435 W |
| Harmonized System (HS) code | 84729080 |
Weight and Dimensions| Depth | 1146 mm |
|---|---|
| Width | 466 mm |
| Height | 66 mm |
| Weight | 1260 g |
Details the suitable applications for hot or cold laminating foils and thin documents.
Warns of electrical shock from damaged parts and advises checking the laminator before use.
Explains the hot lamination process, temperature, and bonding benefits, recommending specific foils.
Details cold lamination using adhesive, suitable for non-permanent sealing, and the process steps.
Describes how to clear jammed laminating foil using the Jam Release lever and advises post-jam cleaning.
Provides solutions for foil jams, emphasizing correct foil usage and thickness limits.
To Next Page
