Olympia A 396 - Troubleshooting; Disposal Notes; Warranty

15
Disconnect the power plug before starting to clean the unit with a damp
cloth. If necessary, the housing can be cleaned using a cloth moistened with
clean water with a little mild soap applied. Never use any solvents or ag-
gressive cleaning agents.
Troubleshooting
Fault Corrective measures
• LED does not
light up
• Unit does not
respond
• Check that the power plug has been properly con-
nected to the power socket.
• If the fault cannot be cleared, contact our hotline.
• Foil jam • Check the foil pockets being used are the correct size.
• Only use pouches of the size specified.
• Ensure that the pouch has been inserted correctly in
the unit.
• To clear the fault, follow the instructions in the Section
"Clearing Foil Jams".
• Laminated foil is
not completely
transparent
• Laminate the same foil again to improve the lamina-
tion result.
Conformity of the equipment to the
EU directives is confirmed by the
CE symbol.
Disposal Notes
This symbol [the crossed-out wheeled bin/PICTURE] means that the
product should be brought to the return and or separate collection
systems available to end-users, when the product has reached the
end of its lifetime. This symbol applies only to the countries within the
EEA. EEA = European Economic Area, which comprises the EU
Member States plus Norway, Iceland, and Liechtenstein.
Warranty
In the case of a defect, please return the device together with the receipt and
original packing material to the point-of-sale.