Olympia Becco - User Profiles; Selecting Pictures; Torch

39
40
User Profiles
22
User Profiles
Use the Userprofiles menu to change the ring tone settings.
To open the Userprofiles menu, press:
D B/C Userprofiles F
Press the B/C keys to select a profile and then press the F key select from the following options:
Activate Activate the profile selected.
Customize Adapt the selected profile to your personal needs
(+ Adapting user profiles, Page 22).
Reset Reset the profile selected to the default factory settings.
Adapting user profiles
Navigate through the Edit menu using the B/C keys and press the F key to select from the
following menu options:
Alerttype Set whether the phone should ring and vibrate, ring only or vibrate
only at the set time.
Ringtype Set the ringing type for incoming calls.
Incomingcall Set the ringing tone for incoming calls.
Ringtonevolume Set the ringing tone volume for incoming calls.
Message Set the ringing tone for an incoming text message.
Messagevolume Set the ringing tone volume for an incoming text message.
Keypad Set the key tone.
Keytonevolume Set the key tone volume.
Poweron Set the power on tone.
Poweroff Set the power off tone.
coveropen Set the tone indicating the cover is being flipped open.
coverclose Set the tone indicating the cover is being flipped shut.
Systemalert Switch the system tones on/off.
Selecting Pictures
G Open picture selection menu
3 sec. 1 - 8 Select the memory location
B/C Add Select the option
B/C [Select phone book entry], confirm prompt
B/C Edit C Family Phone [Select picture in the file manager] F Confirm
the selection
G Save the changes
Dialling via the picture selection menu
G Open picture selection menu
1 - 8 Call the number assigned to the memory location
Torch
An LED is provided at the top of the mobile phone which can be used as a torch.
N Slide upwards] Switch the torch on.
N [Slide downwards] Switch the torch off.