Why does my Olympia PS 36 stop working after a while?
If your Olympia Paper Shredder stops working after being out of service for a while or during operation, it might be due to exceeding the continuous operation time. Disconnect the power plug and let the motor cool down to room temperature. Check the "Technical Data" chapter for continuous operation information.
How to fix Olympia PS 36 Paper Shredder that is not working?
If your Olympia Paper Shredder isn't working, ensure the power plug is properly connected to the power socket. Also, set the sliding switch to Auto and slide the paper into the infeed slot, making sure it touches the sensor in the middle.
General| Basket volume | 7 L |
|---|---|
| Product color | Black |
| Working width | 340 mm |
| Shredding size | 6 mm |
| Shredding type | Strip shredding |
| Overheat protection | Yes |
| Shredding paper clips | - |
| Security level (paper) | 2 |
| AC input voltage | 220-240 V |
| AC input frequency | 50 Hz |
| Power consumption (typical) | 210 W |
| Harmonized System (HS) code | 84729080 |
Weight and Dimensions| Depth | 70 mm |
|---|---|
| Width | 380 mm |
| Height | 120 mm |
| Weight | 1350 g |
Details safety labels and their meanings to prevent injury during operation.
Covers essential electrical safety practices, including plug handling and cable precautions.
Details the function and positions of the sliding switch for controlling shredder operation.
Guides users on the correct sequence to power on the paper shredder.
Instructs on the proper method for inserting paper and credit cards into the shredder.
Explains the procedure for safely powering down the paper shredder.
Explains using the reverse function to clear paper jams.
Describes using the auto/forward function to help clear residual paper.
Details the process for emptying the shredder's waste bin.
Explains the importance and method of oiling the cutting mechanism for optimal performance.
Provides instructions on how to clean the exterior of the paper shredder.
To Next Page
