14
Oiling the Cutting Mechanism
If you want to increase the working life of the shredder, you should oil the shredder's cutting
mechanism at regular intervals� Olympia Business Systems Vertriebs GmbH offers a special oil
for shredders� For more information, please contact our hotline:
attention! Risk of property damage through using the wrong oil! Do not
use spray oils� Only use a special oil intended for shredders�
1 Apply the special oil for shredders in several lines horizontally across a sheet of paper�
2 Set the switch to its auto position�
3 Insert the oiled sheet of paper in the paper infeed� The paper with oil applied is inserted and
oils the cutting mechanism�
Emptying the Waste Bin
Empty the waste bin regularly� This prevents shredded material jamming and causing malfunc-
tions as a result�
1 Set the switch to its off position�
2 Disconnect the power plug from the power socket�
3 Remove the shredder from the waste bin�
4 Empty the waste bin�
5 Mount the shredder on the waste bin again� The shredder latches audibly in place�
Clearing Residual Material
If the shredder no longer shreds material as you expect, remove any residual material from the
cutting mechanism�
1 Set the switch to its reV position� The cutting mechanism runs in reverse and releases any
material remaining in the cutting mechanism�
2 Set the switch to its off position�
3 Disconnect the power plug from the power socket�
4 Remove any residual material carefully from the cutting mechanism using an appropriate
pointed object�
Regular Cleaning
Clean the shredder at regular intervals�
1 Disconnect the power plug from the power socket�
2 Use a slightly damp, lint-free cloth to clean the surface of the shredder housing� Do not use
any solvents or cleaning agents�
To Next Page
