23
Installing the Smoke Alarm Device on a
Ceiling
During installation, pay attention to maintain at
least 50 cm clearance to electrical devices,
doors, ventilation shafts or other objects.
The assembly material
required is contained in the pack-
age contents�
1 Turn the base anticlockwise
carefully and remove the base
from the smoke alarm device�
2 Screw the base on the ceiling
at the intended installation
location with two screws�
Use the facing slots in
the base as a template
and use the dowels for
additional xation strength
according to the ceiling properties�
3 Fit the smoke alarm device on
the base and screw the smoke
alarm device clockwise until
rmly xed.
To Next Page
Loading...