13
Contents of Package
• 1 binding machine
• 10 transparencies
• 5 black rear covers
• 5 white rear covers
• 5 combs (8 mm)
• 5 combs (10 mm)
• 5 combs (12 mm)
Symbols on the Machine
In order to that your binding machine has a long service life and to extend its
period of usability, you should stay within the limits shown below.
150 / Sheets Binding / Blatt Bindung
The binding capacity of the binder is 150 sheets. Up to 150 sheets of
copying paper (80gsm) can be bound by a single comb.
8 / Sheets Punching / Blatt Lochen
The punching capacity of the binder is 8 sheets. A maximum of 8 sheets
of copying paper (80gsm) can be punched at a time. The same applies to
the four-hole punch at the rear of the unit.
1 / Cover Punching / Deckblatt Lochen
The binder can punch one transparent cover sheet or 1 very stiff rear
cover sheet (e.g. 235 gsm).
Attention: Non-compliance with these instructions for use may
substantially shorten the unit's life.
Setting up
Carefully remove the unit from its packaging and place it on a flat stable sur-
face. Sightly push down the lever and use the locking lever to unlock the
handle.
Note: A thin film of lubricant prevents any rust film from depositing on
the punching mechanism. Clear this film by punching scrap paper until clean
before punching.
To Next Page
Loading...