Olympus Lock 100DR - User Manual

800-525-0954 | www.olympuslock.com
info@olympuslock.com
Typical Installation
Flush Lipped
Overlay
Overlay* Full Overlay
*Overlay installation is not recommended
for particleboard.
Long bolt
option
7/8 or 1 3/8
barrel length
56-1 bar strike
Included Accessories:
2 nickel plated keys
56-1 bar strike
4 lock mounting screws
Copyright © 2020 Olympus Lock, Inc.
INSTALLATION
INSTRUCTIONS
Deadbolt Cabinet Door Lock
100DR
LH RH
Left-hand (LH)
Hinged on left
Right-hand (RH)
Hinged on right
Installation/handing for
key-retaining option
WP21
WP22 WP23
Optional spacers Note: use of spacers and strikes depends on application and material thickness.
WP20

Summary

Lock Components and Accessories

Included Accessories

Lists the accessories provided with the lock, including keys, strike, and mounting screws.

56-1 Bar Strike

Details the dimensions and specifications of the 56-1 bar strike included with the lock.

Optional Spacers

Shows optional spacers and notes their use depends on application and material thickness.

Installation Handing and Types

Key-Retaining Option Handing

Illustrates left-hand (LH) and right-hand (RH) configurations for the key-retaining option.

Typical Installation Methods

Depicts common installation types: Flush, Lipped Overlay, Overlay, and Full Overlay.

Drill Guide and Template

Drilling Instructions

Provides guidance on drilling holes for lock installation, specifying hole sizes and locations.

Installation Template Reference

References the installation template for models 100DR, 100B, and 100M.

Olympus Lock 100DR Specifications

General

Finish	Satin Nickel
Keyway	KW1
Handing	Reversible
Power Source	Battery
Lock Type	Deadbolt
Backset	2-3/8" or 2-3/4"
Strike Plate Material	Metal