CHANGING THE CAMERA BACK
The camera back of the OM-1 is fully
interchangeable with the Recordata
Back 1 and 250 Film Back 1. To remove
the camera back, push down on the re-
lease pin as shown. Do not remove the
back unless necessary.
Recordata Back 1
The Recordata Back 1 registers data
such as date, number, alphabetical code,
etc. directly on the picture.
250 Film Back 1
The 250 Film Back 1 is designed for
winder or motor drive shooting; it ac-
cepts a bulk loaded magazine of 250
frames. (See page 42.)
30
To Next Page
Loading...
