Macrophoto Stand VST-1
A rugged stand specially designed for
close-up and high magnification photo-
graphy. Usable with various stage plates.
Complete with a round frosted plate
(black at back) for incident light and a
pair of stage clips.
Macrophoto Stand B Adapter
For use with the Macrophoto Stand, to
support the Auto Bellows or Focusing
Rail on the Stand.
Macrophoto Stand Extension Bar
VST-E
Trans-llluminator Base X-DE
Indispensable for holding the Macro-
photo Stand VST-1 for magnified pho-
tographs. Supplied with a built-in 100V
20W illuminator with a mirror, and a
pair of wooden handrests for ease of
operation. Can be used with various
stage plates and filters. When used with
the Lieberkuhn Reflector, it is con-
venient to replace the reflector mirror
with the Centering Mirror PM-E LCS.
Cable Release SR-II
For use with the OM Body or Auto
Bellows to eliminate shutter vibration at
shutter release.
Epi-llluminators PM-LSD 2
This pair of illuminators offer vertical
illumination essential to macrophoto-
graphy. The height of the illuminator is
adjustable on the tall pillar, suitable to
overstage or substage illumination.
When used with the Trans-llluminator
Base X-DE, the Illuminator supplies
transmitted light. Focusing is adjustable
by shifting the bulb filament. A 6V to
8V variable transformer is provided.
Eight filters are available in various sizes,
including color, black and white, neutral
density, etc. for transparent or trans-
lucent subjects.
Extends the height of the Macro-
photo Stand. Length: 7.5cm (2.95")
56
To Next Page
Loading...
