36 En
En
J PLAYBACK ON A TV
Use the video cable provided with the camera to play back recorded images
on your TV.
1
Make sure that the TV and camera are turned off.
Connect the Video OUT jack on the camera to the Video
input terminal on the TV using the video cable.
2
Turn the TV on and set it to the video input mode.
• For details of switching to video input, refer to your TV’s instruction
manual.
3
Set the mode dial to q
qq
q and turn the camera on.
• The last picture taken is displayed on the TV. Use the arrow pad to
select the picture you want to display.
• The close-up playback, index display and slideshow functions can also
be used on a TV screen.
• You are recommended to use the optional AC adapter when using
the camera with a TV.
• Make sure that the camera’s video output signal type is the same as
the TV’s video signal type.
Video cable
Video OUT jack
Note
basic_e_po167_6.fm Page 36 Tuesday, February 4, 2003 5:06 PM
To Next Page
Loading...
