119
Chapter 8
Pixel Mapping
The Pixel Mapping feature allows the camera to check and adjust the CCD
and image processing circuit automatically. It is not necessary to operate this
function frequently. Approximately once a year is recommended. Wait a few
minutes after the monitor is used or continuous shots are taken to allow for
proper performance of the Pixel Mapping function.
1
In the top menu, select MODE MENU
T SETUP T PIXEL MAPPING.
~ “How to use the menu” (P. 38)
2
Press í.
● START appears.
3
Press .
● A progress bar appears during Pixel
Mapping.
● When Pixel Mapping is finished, the
screen returns to the menu.
● If the power is turned off during Pixel Mapping, start again from Step 1.
● To shoot in the mode or to play back, perform Pixel Mapping in
another mode.
To Next Page
Loading...
