178
Troubleshooting
10
Miscellaneous
Possible cause Corrective action Ref. Page
The settings are returned to the factory default settings when the
camera is turned off.
ALL RESET is set to
ON.
Select the SETUP tab in the mode menu and set
ALL RESET to OFF.
P.137
No picture is displayed on the TV when connected to the camera.
The video output
signal is incorrect.
Set the video output signal according to the region
where used.
P.162
The TV video signal
setting is incorrect.
Set the TV to the video input mode. P.128
To Next Page
Loading...
