55
Flash
4
4 Flash
Flash shooting
Select the flash mode best suited to the light conditions and the effect you
want to achieve. You can also adjust the amount of light emitted using the
flash intensity control.
1
Push the flash lever up. (c
cc
c)
• The flash pops up. (d)
2
Set the flash mode by repeatedly
pressing #.
• The flash mode changes in the
sequence shown below (when all
modes are available).
• If no operation is performed for about 3 seconds, the flash mode is set
and the mode selector screen is automatically exited.
• To prevent the flash from firing, press down on the top of the flash to
retract it.
Mode dial
c
d
Shutter
button
#
Flash mode button
SLOW
Auto (Auto-flash)
#SLOW (Slow
synchronization)
! (Red-eye
reduction flash)
#(Fill-in flash)
To Next Page
Loading...
