Note:
• The flash cannot be used in the Sequence mode.
• This mode can only be used in the SQ mode (automatically set).
• Since the shutter speed is set to 1/30 second or faster to prevent blurring
due to camera movement, the resulting picture may be darker than
expected.
• The Sequence mode will be canceled when the power is turned off.
• It will take approx. 10 seconds to record the pictures taken.
74
SEQUENCE MODE (cont.)
Press the OK button to save
the setting. Press again to
cancel the Menu.
• If the Menu button is pressed
before the OK button, the
setting and Menu mode will be
canceled.
• appears on the control
panel.
Take a picture.
• The maximum number of
pictures that can be taken is
about 10.
5
4
Control panel
To Next Page
Loading...
