Olympus E-3 User Guide

84
WB (UMPg67):
Select your choice of AUTO* or manual white balance
settings. A full list is provided in the appendices and on
page 67 of the user manual.
ISO (UMPg50):
Choose from AUTO* setting or any option within the
range of ISO100 to ISO3200.
NOISE REDUCTION (UMPg74):
ON* - Camera takes a reading of sensor after shutter has
closed on exposures of 2 seconds or longer to identify
“hot pixels” and then electronically processes the captured
image to remove erroneous data based on the
information obtained from the reading of the sensor. This
setting does not operate if sequential shooting is in effect.
After a long exposure with noise reduction on, the red
“Card Access” lamp will illuminate until the processing has
completed. No further photography is possible while the
card access lamp is on.
OFF – Does not apply noise reduction to any images
NOISE FILTER (UMPg74):
Applies noise correction to photographs taken at higher
ISO values and/or in low light. Options include OFF,
LOW, STANDARD* and HIGH.
Use HIGH when shooting at high ISO values.

Olympus E-3 Specifications

General

Megapixel	10.1 MP
Sensor type	CMOS
Image stabilizer	Yes
Image sensor size	4/3 \
Supported aspect ratios	4:3
Maximum image resolution	3648 x 2736 pixels
Digital zoom	0 x
Optical zoom	5 x
Interface	USB
Power source	BLM-1
Video capability	No
Camera shutter speed	1/8000 - 60 s
Display diagonal	2.5 \
Magnification	1.15 x
Product color	Black
Image editing	resizing, rotating
Photo effects	black&white, Sepia
White balance	auto, Cloudy, custom modes, daylight, Fluorescent, Tungsten
Camera playback	Slide show
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	10 - 90 %
Operating relative humidity (H-H)	30 - 90 %
Compatible memory cards	xd
Light metering	centre-weighted, spot
Light exposure modes	aperture priority AE, auto, manual, shutter priority AE

Weight and Dimensions

Depth	74.5 mm
Width	142.5 mm
Height	116.5 mm
Weight	810 g