15
En
Connecting the camera
Use the AV cable provided with the camera to playback recorded images on your
TV. Both still pictures and movies can be played back.
1 Make sure that the TV and camera are turned off. Connect the multi-
connector on the camera to the video input terminal on the TV using the AV
cable.
2 Turn the TV on and set it to the video input mode.
For details on switching to video input, refer to your TV’s instruction manual.
3 Turn the camera on and press the q button to select the playback mode.
The last picture taken is displayed on the TV. Use the arrow pad (ONXY) to select
the picture you want to display.
Playback on a TV
Connect to the TV’s
video input (yellow)
and audio input (white)
terminals.
AV cable (provided)
Multi-connector
Connector cover
d4339_e_basic_00_bookfile.book Page 15 Tuesday, December 12, 2006 11:09 AM
To Next Page
Loading...
