EN
39
Using OLYMPUS Master
To exit OLYMPUS Master
1 Click “Exit” on any window.
• OLYMPUS Master is exited.
1 Click “Transfer Images” on the browse
window, and then click “From Camera” .
• The window for selecting the pictures you want to transfer from
the camera is displayed. All the images in the camera are
displayed.
2 Select “New Album” and enter an album name.
3 Select the image files and click “Transfer
Images”.
• A window indicating that the download is complete is displayed.
4 Click “Browse images now”.
• The downloaded images are displayed in the browse window.
To disconnect the camera
1 Make sure that the card access lamp has stopped
blinking.
2 Make the following preparations for
disconnecting the USB cable.
Windows
1 Click the “Unplug or Eject Hardware” icon in the system
tray.
2 Click the message that is displayed.
3 When a message is displayed saying that the hardware can
be ejected safely, click “OK”.
Macintosh
1 The trash icon changes to the eject icon when the “Untitled”
or “NO_NAME” icon on the desktop is dragged. Drag and
drop it on the eject icon.
3 Disconnect the USB cable from the camera.
Displaying camera images on a computer
Downloading and saving images
Card access lamp
d4348_33_e_0000_7.book Page 39 Thursday, June 21, 2007 7:24 PM
To Next Page
Loading...
