Jiii!i li ii iiiiiiili , i, ,,i,,
OLYMPUS Master 2
System requirements and
installation of OLYMPUS
Master2 ......................................................................................................................................
Install the OLYMPUS Master 2 software by
referring to the included installation guide.
Connecting the camera to a
_omputer
m Make sure the camera is turned off.
• The monitor is off.
• The lens is retracted.
2 Connect the camera to a computer,
• The camera automatically turns on.
_ Locate the position of the USB port by
referring to your computer's instructions
manuat.
3 Use %_ to select [PC], and
press the [,_,]button.
• Thecomputerautomaticallydetectsthecameraas
anew deviceon thefirstconnection.
Windows
After the computer detects the camera, a
message indicating the completion of the
setting appears. Confirm the message and
click "OK". The camera is recognized as a
removable disk.
Macintosh
When iPhoto has started, exit iPhoto and start
OLYMPUS Master 2.
_ While the camera is connected to the
computer, shooting functions are disabled.
_ Connecting the camera to a computer via a
USB hub may cause unstable operation.
_ When [MTP] is set for the submenu that
appears by pressing [_ after selecting [PC]
in Step 3, images cannot be transferred to a
computer using OLYMPUS Master 2.
........8tarting OLYMPUS Maste_ 2
Double-click the OLYMPUS Master 2
icon.
Windows
app ...... the desk top.
Macintosh
appears in the OLYMPUS Master 2 folder.
® Browse window appears after starting the
software.
When you start OLYMPUS Master 2 for the
first time after instafiation, "Default Settings"
and "Registration" screen appear. Follow the
instructions on the screen.
EN
To Next Page
Loading...
