Flash modes: AUTO (Automatic flash activation in
low-light and backlight). AUTO-S (Red-eye
reducing, in low-light and backlight). OFF (No
flash). FILL-IN (Forced activation).
Battery check: Displayed on LCD panel.
Weatherproof: IEC Standard publication 529.
Classification of degrees of protection provided
by enclosures. Degrees of protection indicated
by the second characteristic numeral 4 Short
description: Protected against splashing water
Definition: Water splashed against the
enclosure from any direction shall have no
harmful effect Test for second numeral 4: The
equipment is sprayed from all practical
directions.
The water pressure is adjusted to give a delivery
rate of 10 lit./min. The test duration shall be 1
min. per m
2
of calculated surface area of the
enclosure with a minimum duration of 5 min.
Power source: Two 3V lithium batteries
(DL123A/CR123A).
Dimensions: 133(W) X 68(H) X 56(D) mm
(5-1/4X2-11/16X2-3/16in)
(without protrusions).
Weight: 305 g (10.8 oz) (without batteries).
SPECIFICATIONS FOR DATE UNIT
Imprinting direction: Data imprinted onto film from
lens side.
Data coding: No data, year-month-day, month-day-
year, day-month-year and day-hour-minute.
External indication of data: Data display on liquid
crystal panel.
Film speed setting: Automatic film speed setting.
Automatic calendar system: Up to year 2020.
Power source: Ordinarily used with camera body.
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE OR OBLIGATION ON
THE PART OF THE MANUFACTURER.
51
To Next Page
Loading...
