19
En
Use the AV cable provided with the camera to playback recorded images on your TV.
Both still pictures and movies can be played back.
1 Make sure that the TV and camera are turned off. Connect the multi-connector
on the camera to the video input terminal on the TV using the AV cable.
2 Turn the TV on and set it to the video input mode.
For details of switching to video input, refer to your TV’s instruction manual.
3 Press the q button to turn on the camera.
The last picture taken is displayed on the TV. Use the arrow pad (43) to select the picture
you want to display.
CONNECTING THE CAMERA
Playback on a TV
AV cableConnector cover
Connect to the TV’s video
input (yellow) and audio
input (white) terminal.
Multi-Connector
d4338_basic_e.book Page 19 Tuesday, August 8, 2006 11:30 PM
To Next Page
Loading...
