Olympus Stylus 1000 - Direct Printing (Pictbridge)

16
En
Using the provided USB cable, you may connect your camera directly to a
PictBridge compatible printer such as the Olympus P-11 to make prints.
1 In playback mode, display the picture you want to print out on the monitor.
2 Connect one end of the provided USB cable into the camera’s multi-connector
and the other end into the printer’s USB connector.
3 Press h//P.
Printing starts.
When printing is finished, disconnect the USB
cable from the camera with the picture selection
screen displayed.
Direct Printing (PictBridge)
USB cable
Multi-connector
Connector cover
OK
PC / CUSTOM PRINT
EASY PRINT START
d4331_basic_e.book Page 16 Monday, August 7, 2006 2:37 PM