[COMBINE IN CAMERA 1]
While panning the camera, the camera automatically shoots and combines pictures for a
single panoramic picture
in
the camera. Only combined pictures are saved.
1st
Connects pictures
from left to right
2nd
Target mark
3rd
• Take the first picture.
• When you slightly move the camera in the direction
of
the next picture, a target mark and a
pointer appear.
• The pointer moves as you pan the camera. Move the camera slowly and steadily until the
pointer overlaps the target mark, then stay still.
• The camera shoots the second picture automatically.
• After the current subject appears on the monitor, take the third picture
in
the same manner
as the second one.
• After the third picture
is
taken, the pictures are automatically combined, and then the
combined picture is displayed. To combine only two pictures, press
@ before shooting the
third picture.
• To cancel making the panoramic picture during shooting, press
MENU
before pressing
@.
[COMBINE
IN
CAMERA 2]
Pictures are manually shot, and the camera automatically combines pictures for a single
panoramic picture
in
the camera. Only combined pictures are saved.
1st
Connects pictures
from left to right
2nd 3rd
• Use
<II>
to specify at which edge you want to connect the pictures, and then take the first
picture.
• Compose your second shot so that the edge
of
the first picture overlaps the edge
of
the
second picture, then shoot.
• Take the third picture
in
the same manner as the second one.
• After the third picture
is
taken, the pictures are automatically combined, and then the
combined picture is displayed. To combine only two pictures, press
@ before shooting the
third picture.
• To cancel making the panoramic picture during shooting, press
MENU
before pressing
@.
EN
25
To Next Page
Loading...
